|
|
Inovation of drill model design and control
Czipszer, Jiří ; Pásek, Jan (referee) ; Kaczmarczyk, Václav (advisor)
The objective of this bachelor thesis was to make hardware innovation laboratory task Driller subject Programmable Automation Controllers Technical University in Brno. Innovation of task assignment, for its subsequent implementation into laboratory scripts. For this assignment, create sample programs in the languages used in this subject, protocols suitable for submission and subsequent demonstration to students, as well as visualization.
|
|
|
RFID acces system realization
Buchal, Adam ; Matyáš, Pavel (referee) ; Marada, Tomáš (advisor)
This bachelor thesis deals with the use of RFID technology in access control systems in intelligent buildings. The study also describes the principle functions of RFID readers and the list of frequencies at which the technology works. The next section is dedicated to the design of the access system with iClass R10 operating at a frequency of 13.56 MHz, the whole system is controlled by a microprocessor ATmega8. The board design is described program for creating electronic schematics EAGLE. The try-out functionality and basic programming functions used kit EVB 4.3 The last section describes the procedure for the production of printed circuit boards photo path including drawings and schemes and also describes the program controlling the entire device using the block diagram.
|
|
|
Precision audio preamplifier for headset measurement
Šimek, Michal ; Balík, Miroslav (referee) ; Hanák, Pavel (advisor)
This thesis deals with microphone and headphone preamplifier for microtelephone and headset. The design shall meet the electrical interface requirements set out in ITU-T Rec. P.381(08/2012). The design includes a voltage converter, microtelephone bias and both a battery and an external power supply. In this work is also described the design of printed circuit board and the solution of a low noise in the whole circuit. The aim of this thesis is to design, built and embed the laboratory fixture into a metal box. Finally, measure the product on an APx525 audio precision analyzer.
|
|
|
Design of LED lighting for industrial camera systems
Svoboda, Martin ; Honec, Peter (referee) ; Janáková, Ilona (advisor)
The bachelor thesis deals with the development, design and construction of multispectral lighting for industrial camera systems. The lighting is conceived as a modular device consisting of two parts - a control unit, which can be communicated primarily through the Modbus TCP / IP protocol, which powers, controls and collects information about the connected lighting unit. The illumination unit is equipped with 64 intelligent RGBW light emitting diodes located in an 8x8 matrix and one control diode opposite to which light intensity sensors are placed to give feedback on the color and intensity of the light. There are two temperature sensors located between the LEDs to check the temperature of the lighting unit. Both units are housed in a robust aluminum chassis. The control unit contains a microcomputer programmed in C language
|
|
|
Temperature and humidity monitoring devices with wirelless communication
Horváth, Michal ; Baštán, Ondřej (referee) ; Bradáč, Zdeněk (advisor)
The diploma thesis is about designing device which monitors temperature and humidity. In the first part of thesis are explained basic terms, importance of key variables and on market offered products are described. After that the thesis describes device concept design with schematic designs. From designed schematics are described printed circuit board designs. Next part is about device commissioning and correction of errors caused by incorrect design. Last part is about program designing and device testing.
|
|
|
Wireless Signal Transmission of DMX512 Interface
Polóni, Pavol ; Jaroš, Jiří (referee) ; Šimek, Václav (advisor)
Master's thesis deals with design and implementation of a system for wireless transmission of DMX signal 512, which is primarily designed for the management of lighting effects. Its electrical specification is based on the EIA485 standard. Text of the work describes the design stage. First is the issue of implied actual protocol DMX 512 or EIA485. Next sign on selecting a suitable architecture for wireless transmission, management and compilation of the block diagrams. Describes the operation of the component selection and circuit implementation of the scheme, which is using the DPS Eagle compiled. In conclusion, this work is to evaluate the results of the proposed system and showing the way to its further development so that it can be realistically implemented in practice.
|
|
|
Communication protocols emulator
Fabulec, Martin ; Dejdar, Petr (referee) ; Jablončík, Lukáš (advisor)
The content of this work is the analysis of commonly used serial protocols RS-232 and RS-485 and their transmission using the optical fiber. The work deals with the analysis of the actual problematic and the connection design of the optical fiber system, communication through optical fiber and communication interface. The design of the communication protocol emulator and the verification of the functionality of the transmission system are also discussed. The theoretical part deals with optical components such as optical receiver and transmitter, SFP module and the description of the RS-232 and RS-485 interface. The practical part mentions the connection proposal and subsequent data transfer.
|
|
|
The Design of Enlargement of Sensor and Control Module of Mobile Robots Named Brontes
Husar, Jan ; Kopečný, Lukáš (referee) ; Florián, Tomáš (advisor)
This bachelor's thesis deals with the proposal of the sensory module and the control of mobile robots named Brontes enlargement. For this purpose a printed circuit board named MX05 was created, which extends its functionality via connection to the control board named LTR001.2. Construction of the board was conducted on the bases of the needs and requirements coming from robot peripherals. The proposal was created containing the control, protection and filtering features. Further, the board was realized and inhabited. Using MX05 creates a great simplification of wiring and there is implied the extension of the original features that are useful not only in robots Brontes.
|
|
|
DC/DC step-up converter for notebook
Škunda, Michal ; Klíma, Bohumil (referee) ; Červinka, Dalibor (advisor)
Given bachelor’s thesis devoted to a proposal and implementation of transducer STEP-UP for supplying of notebook in car. Introduction presents dividing of switching power supplies followed by a choice and a proposal of power supply. In this work we can find the specific proposal of inductor, the proposal of electronic connexion and the proposal of PCB layout. There is a software EAGLE used for the design of PCB layout. In the last part of work there are particular courses of current and voltage that characterize power supply pictured. The work contains measured load characteristic of switching power supply loaded by notebook as well. Notebooks need to have quality power supplies that is why there was a special attention paid to the quality of supply and its electric parameters.
|
|
|
Wireless accelerometer modul
Lysoň, Jakub ; Odstrčilík, Jan (referee) ; Bubník, Karel (advisor)
This master’s thesis describes a wireless accelerometer module. The aim of this work was to study the properties and involvement of the accelerometer, wireless module design for data transfering from the accelerometer to the PC and the module implementation. As a wireless device is used bluetooth module that enables communication between the product and the computer. The wireless module used rechargable lithium ion battery that helps keep module alive without adapter or net cable.
|
guest ::
